Tama Speed Cobra 910 Hi Hat Stand - HH915D

The HH915D features the same long footboard as our Speed Cobra Bass Drum Pedal. Its core design is based on the Iron Cobra Hi-Hat Stand, widely recognized as one of the best performing hi-hat stands in the world. The longer footboard offers footwork flexibility, added control and sensitivity. The latest innovation on this stand, the new "Quick-Set Clutch", allows hi-hat cymbals to be quickly attached and removed. The Hinge Guard Block on the footboard holds the bearing more evenly, minimizing stress and maximizing smoothness.

Features

The idea of replacing the traditional pull mehanism with a lever design was a genuinely revolutionary concept. Our Speed Cobra version uses roller bearings at the lever fulcrum for even smoother footboard action while a super-strong Kevlar® strap connects the footboard and pull rod for even, noise-free action. (Kevlar® is a registered trademark of the Dupont Corporation)

With just one touch, the Quick-Set Clutch can be attached or removed - simply push the button on the side of the clutch. The clutch also allows the top hi-hat cymbal to float more freely, maximizing the natural resonance of the cymbals.

Specially shaped plastic and metal nuts fit together perfectly to keep the cymbal rod from loosening while playing.

Since the foot pedal can be rotated around the the dual leg base, the Swivel Foot feature greatly expands floor space and set-up flexibility.

The HH915D features the same long footboard as our Speed Cobra Bass Drum Pedal. Its core design is based on the Iron Cobra Hi-Hat Stand, widely recognized as one of the best performing hi-hat stands in the world. The longer footboard offers footwork flexibility, added control and sensitivity. The latest innovation on this stand, the new "Quick-Set Clutch", allows hi-hat cymbals to be quickly attached and removed. The Hinge Guard Block on the footboard holds the bearing more evenly, minimizing stress and maximizing smoothness.

It's called a stand because it's not supposed to "walk"-and our Duo-Spike makes sure your Iron Cobra hi-hat stands in one place. You can easily switch from rubber to metal by using a standard drum key.

No more tension rods getting bent out of shape during transport! With Spare-The-Rod, you can save your tension rod the rigors of the road by packing it in the specially designed upper section pipe. It's a small, but very significant TAMA hardware innovation.

1.Insert the tension rod into the upper tube.

2.Hold the tension rod in place with the hi-hat clutch.

3.Done. The upper tube covers the tension rod.

Our new Glide-Tite Grip Joint allows for a more secure attachment by using a metal-to-metal contact point. This provides an extremely solid anchor and complete isolation for a tom or cymbal. Because the stand does not move with the instrument, the natural resonance of that instrument is maximized.

Offering even less friction than standard ball bearing, Oiles® bearings also eliminate side-to-side motion and provide superior durability (which is why they're used in the aerospace industry).

•Spring Seat
•6-way Tension Adjustment
•Oiles® Bearing Hinge
•Spare-The-Rods Tension Rod Protector
•Non-Loosening Tension Rod
•Glide-Tite Grip Joint
•Bigger Rubber Feet w/Duo-Spike
•Long Footboard
•Footboard Angle Adjustment
•Tilt System
•Additional Short Rod Included
•Weight: 5.2kg (11.7lbs)
•Height Adjustment Range:
745mm-960mm (29 3/8" - 37 3/4") (Standard Rod) / 745mm-810mm (29 3/8" - 31 7/8") (Short Rod)